Specialty Motor Cams Specialty Motor Cams Specialty Motor Cams Specialty Motor Cams Address 1931 Ford Tudor Sedan 1931 Ford Tudor Sedan
HomeAbout UsOver Head ConversionsProductsServicesCamshaftsFuture ProjectsHot LinksContact UsPhoto Gallery1931 Ford Model A Pickup Truck
Specialty Motor Cams Services
Dyno Tested Performance Engines

Dyno TestingBlue Printed
Model A & B with drilled crank and precision counterbalanced, complete full pressure oiling system (high volume pump), alum valve cover and full flow filter.

Dyno Test 1 | Dyno Test 2

Click here if you need to download Adobe Acrobat Reader.

  • New slipper skirt pistons, new rods with inserts.
  • New Billet main bearing caps, new main bearing studs, bearing inserts and modern front and rear seals.
  • CNC ports and bowls for 1.560 exhaust valves, hardened exhaust seats and 1.750 Intake valves CNC cut to provide maximum flow, modern keepers, performance valve springs and spacers, single piece guides.
  • Machined billet under drive water pump and crank pulleys
  • New leakless water pump
  • Electronic distributor
  • Road Runner performance cam cut from billet 8620 steel and heat treat to provided long life.
  • Includes 33# lightened flywheel ........................ $315.00 ... value
  • High compression cylinder head CNC cut chambers.
Total cost with all modifications above package price only*
*(Prices based on your useable long block core with flywheel)
$6995.00
Reduce Price $323.00 for a forged counterbalanced B crank on your core.
Add $595.00 to match rods and pistons to bob weight crank cheeks, only on weld on counter weight cranks.

Additional Performance Parts Customers choice items marked
25# Aluminum Flywheel with Iron Insert
$625.00

Swap Out 33# Add
$310.00
9 inch V-8 Pressure Plate
$85.00
10 inch V-8 Pressure Plate
$95.00
Weber Carburetor Kit
$475.00
Port Fuel Injection
$2655.00
Headers
$295.00
12 Volt Alternator
$125.00
These prices do not include crack repair, broken studs, and cylinder sleeves. If block is not rebuild able, a fee will be charged for disassembly, degrease and magnaflux.
Sleeve block to STD
$495.00
Crack repair done by quote only

Model A and B Crankshafts Service

Crankshaft Equipment
Standard 4 cyl Crankshaft Grinding
$172.00 *
Add Counter Weights to Crankshaft & Grind
$495.00 *
* (Based on exchange)

CNC Valve Bowl Porting

Custom MachiningWe provide custom machining, grinding, balancing, welding and painting. We can rebuild your Model A running gear from the bottom up and provide you with a running chassis ready to bolt your body on and drive plus painting and body work.

We do not get in upholstery